All results ...
No results
loading ...

Polymer production

The gentle treatment of the melt is crucial for an optimum polymer production process.

Our pumps contribute significantly to the productivity, efficiency and operational reliability of both low-viscosity and high-viscosity applications.

We react to the growing quality demands with high-performance large-area filters or screen changers with filter candles.

Our underwater pelletizer systems produce up to 36,000 kg/h, and with our strand pelletizers you achieve a throughput up to 16,000 kg/h. We offer centrifugal dryers with throughputs up to 100,000 kg/h for pellet drying.

94 products for the application: Polymer manufacturer

thermorex® RT

Polymer processes require pumps which will constantly and reliably feed oligomers and prepolymers through the system. The pump design is highly suitable for low-viscosity applications. The thermorex® RT eliminates the need for pressurized vessels/reactors. The high efficiency and long service life will enhance your production plant’s capacity.

PDF 下载

thermorex®

Polymer processes require pumps which well gently feed low and high viscosity plastic melt through the system. Thanks to specially designed gear teeth with low squeezing power, the maag pump systems thermorex® transfer, booster or metering gear pump is the ideal solution for such applications. The high efficiency and long service life will enhance the capacity of your production plant. thermorex® gear pumps convey plastic melts with a constant, precise flow even at highest discharge pressures.

PDF 下载

refinex® refitherm®

Chemical, refinery, and industrial plant applications are challenging. High process pressures, high temperatures, and viscous media are commonplace in such environments. Precisely the environment in which maag pump systems’ tried and established gear pumps develop their full potential. Thanks to the extensive range of components and materials of constructions to choose from, maag gear pumps can be configured to suit customers’ specific requirements and are therefore far superior to standard pumps in terms of performance and reliability.

PDF 下载

polyrex®

Processes in the manufacture of polyolefins require gear pumps which build up pressure for the units after the compounder. Thanks to special gear teeth with low squeezing power, the polyrex® gear pump is the ideal solution for these applications. The high efficiency and long service life will enhance your production plant’s capacity. Upgrades with shaft and bearing tempering enable an efficient heat discharge and hence a significant increase in flow rates and improved product quality.

PDF 下载

cinox®-V therminox®-V

The pump models cinox®-V therminox®-V are discharge pumps. They have been designed for highly viscous fluids, which are gently extracted from reactors and de-gassing devices even when the inlet pressure is low, ensuring optimum fill characteristics and short dwell times. This new pump series combines the outstanding flow characteristics of the polymer pumps with the exacting requirements of the chemical industry.

PDF 下载

cinox® therminox®

cinox® therminox® 齿轮泵正是为了满足严格的工艺要求而开发的耐腐蚀、不锈钢、可保温输送泵。 由于配置设计多样,材料可选性广泛,马格齿轮泵可根据客户工艺的具体要求提供灵活多变的适用方案。因此,马格齿轮泵拥有远胜于标准齿轮泵的性能和可靠性。无论是高纯度、强腐蚀性,还是高粘度,高温度介质,马格泵系统会为您提供专业的解决方案,同您一起从容面对挑战。

vacorex®

Polymer processes require units that gently discharge low and high-viscosity plastic melts from reactors and degassing equipment. Thanks to excellent fill behaviour and short residence times, the Maag vacorex® gear pump is the ideal solution for such applications. The high efficiency and long service life will enhance the capacity of your production plant’s capacity and availability. vacorex® gear pumps convey plastic melts with a constant, precise flow even at highest discharge pressures.

viscorex® VR

Polymer processes require units that gently discharge low and high-viscosity plastic melts from reactors and degassing equipment. Thanks to excellent fill behaviour and short residence times, the maag pump systems viscorex® gear pump is the ideal solution for such applications. Its high efficiency and long service life will enhance the capacity and availability of your production line. viscorex® gear pumps efficiently convey plastic melts with a constant, precise flow.

PDF 下载

vacorex6 VX

Maag 推出了 vacorex® - x6 系列齿轮泵。 vacorex6 完美满足现代聚合物生产工艺要求-反应釜或脱挥器低料位真空进料,高出口压力 Maag vacorex6 可以输送各类塑料熔体并不影响其品质。低维护长期稳定可靠运行的vacorex6齿轮泵是这类应用最理想的解决方案。

PDF 下载

vispac®

High reliability and functionality are crucial for a seal in the polymer discharging process for guaranteeing optimized product quality and line availability. The vispac® shaft seal is known for its robustness, reliability and especially for its easy handling. This low-maintenance seal is a proven combination of the viscoseal system and sealed stuffing boxes.

PDF 下载

thermorex6 TR/TB

聚合物加工工艺需要泵通过该系统温和地处理高粘度和低粘度塑料熔体。 特殊设计的 低压缩齿设计允许 thermorex® - x6 系列传输,增压或计量齿轮泵实现高压和低剪切。即使在高出口压力下,塑料熔体也以恒定、精确的流量输送——这也适用于低粘度产品,对于低粘度产品,以前的泵代已达到其极限。此外,它们的高效率和长使用寿命将提高任何给定工厂的生产能力。

PDF 下载

polyrex6 PR

Processes in the manufacture of polyolefins require high-pressure gear pumps which build up pressure for the units after the compounder. The new performance driven geometry of polyrex® x6 class results in high throughput rates at high flow rates and low shear stress. Polyrex6 can convey low viscosity polymers where earlier pump generations failed. Thanks to increased pump performance, the specific conveying capacity is 50% higher compared to same housing size pumps of older generations. For debottlenecking existing plants, Maag offers alternative housing designs with matching interfaces to older pump generations.

PDF 下载

extrex6 ER

Elastomeric processing requires positive displacement devices that gentle convey high viscosity rubber through the system. Specifically designed, low compression tooth design allow the extrex6 ER transfer, booster or metering gear pump to achieve both high pressure and low shear. The rubber compound is conveyed with a constant, precise flow even at high discharge pressures – and this also for extremely dry or sticky compounds, where former pump generations reached their limits due to scorch. Additionally, their anyway high efficiency and long life span will extend unrivaled due to reduced internal friction.

PDF 下载

The Double Mechanical Seal is a Maag brand. It has a robust design with buffer fluid. Therefore, it is suitable for corrosive and abrasive applications. The sealing rings are available in carbon and SSiC (sintered silicon carbide ceramic).

Magnetic Couplings with our double containment shell. It provides a hermetically sealed design and is virtually maintenance free. In special designs for applications with suction pressures up to 200 bar.

The double mechanical seal with balanced sealing ring can be used for high inlet pressures. It needs to be used in combination with balanced shaft (double extended shaft, two seals).

The viscoseals are available for high viscous fluids. The seal is contactless and dynamic. It has a simple design and is only one sealing part. A cooled execution is available and it is virtually maintenance free.

The viscoseal is combined with two buffered lip seals. It provides a dynamical sealing during operation and the buffered lip seals provide a static sealing at standstill.

Packing glands in various executions. Without adoptions in the modern sealing technology not widely used any more. It is available in a buffered execution.

CSC

马格 生产的 CSC 连续换网器具有坚固耐用的结构并采用无泄漏工作模式,可达到熔体过滤方面的最高质量标准。Maag 连续换网器不断地在功能性方面得以改进,从而大大提高了产品质量。CSC 换网器采用经过验证的双活塞设计,在工作时无需另外使用任何密封件。各种尺寸与设计的换网器都具有坚固耐用的结构,这将确保本产品可连续对聚合物熔体进行无泄漏过滤。

PDF 下载

HSC

Manual screen changers from maag have been the first choice of cost-effective filtration systems in extrusion lines for many years. Starting at size 45, the manual screen changers optionally come with transmission gearing. Here, the breaker plate is equipped with patented gearing and a pinion which allows an effortless screen change even in restricted space conditions or high sealing pressures. The manual screen changer guarantees the protection of gear pumps and    fine extrusion die gaps from damage and dirt accumulation.

PDF 下载

multinex

Maag multinex filter candles are tailor-made for use in continuously operating dual bolt screen changers of the maag series CSC-P/C. Compared to typical round screen plates, they increase the active screening area up to 60 times, thus reducing significantly ΔP and the flux rate. At the same time, an up to 60 times longer service life of the filter until the next screen change is achieved.

PDF 下载

simplex

Maag designed simplex systems can be provided with either fixed or removable vessels; a compact preheat station with spare vessel can be provided for locating near the line for quick changeout. They are custom designed to minimize initial pressure drop and maximize filter element life. Our proprietary sizing program, based on more than 20 years of experience in the field, incorporates your operating data to size each system for maximum performance and optimized flow while maintaining compact dimensions.

PDF 下载

SSC

The compact single-piston screen changers SSC from maag pump systems provide an alternative for extrusion applications which allow for interruptions in the melt stream during screen changeover. SSC operate without any additional seal and their sturdy construction guarantees reliable and leak-free filtration of polymer melts. The rheologically optimized flow channel directs the melt flow optimally and with a short residence time into the screen cavity. The breaker plate is fitted with screen mesh suitable for the required filtration size. The screen changer is operated by a hydraulic piston.

PDF 下载

CSC-R

马格的大面积换网器基于经实践证明的双活塞结构。申请了专利的曲面多孔板比传统圆形型腔换网器提供4倍之多的过滤面积。这样,极紧凑的结构尺寸提高了更大的产量。过滤精度更高,也使压力损失更低,滤网使用寿命增加数倍。无额外密封件的简单、耐用结构型式确保了可靠、无泄漏的持续运行。

PDF 下载

FSC

源自 马格 的 FSC 换网器配有标准适压密封系统。采用这套密封系统,所需的密封力可自动根据实际的熔体压力进行调整。狭窄的设计特别适用于热敏材料应用领域。所有规格与设计的换网器都具有坚固结实的结构,可确保本产品持续对聚合物熔体进行无泄漏过滤。液压操作换网器可确保熔体泵和模具缝隙免遭损坏和污染。

PDF 下载

DV

Maag diverter valves (DV) are based on the proven single-piston design that operates without any additional seals. The diverter valves type DV are used in Plastics manufacture, pelletizing, and compounding applications where they function as deflection, safety, and start-up valves. Their sturdy construction guarantees reliable and leak-free operation for many years, e.g. as start-up support for underwater pelletizing or for discharging start-up material in pelletizing applications.

CSC-PE

Maag area-optimized continuous screen changers are based on the proven double-piston design. Thanks to the optimized oval-shaped screen cavity the available Screen area relative to the piston diameter is maximized resulting in an extreme compact design of these proven machines. With its minimized residence times of the polymer melt and the significantly lower heating requirement due to its compact design, the CSC-PE from maag stands for maximum efficiency and guarantees reliable and leak-free filtration of polymers for many years.

PDF 下载

duplex

Maag’s duplex polymer filtration system was designed with considerable input from our customers. The result is a patented system that offers process benefits such as minimized residence time and improved heat transfer efficiency. By combining our modeling and technical Expertise of our patented slide valve design with a PLC controlled actuation, maag’s duplex filter systems can be designed to minimize viscosity losses during switchovers and provide seamless transfers.

PDF 下载

DSC

The discontinuously operating screen changer, equipped with a screen cavity, offers a robust and economic alternative for extrusion and compounding applications which permit a brief interruption in the melt flow when changing the screen. Thus, it is also ideal for batch applications during which an application- related shut-down of the unit permits a screen change after a batch is complete.

PDF 下载

CSC/BF-4F

Maag Backflush screen changers are based on the proven double-piston design which operates without any mechanical seals and is equipped with four screen cavities. This design is used mainly in recycling applications. Due to its fully automatic backflush function screen service life is maximized and the level of automation of the entire system is increased. Reduced operating costs and an enormous system availability are the main characteristics of this series. The sturdy construction guarantees reliable and leak-free filtration and backflush performance of polymer melts for many years.

PDF 下载

C-SSC

The continuous single-piston screen changer from Maag is based on the proven piston design with two screen cavities that operates without any mechanical seals. It sturdy construction, available in all sizes and designs, guarantees reliable and leak-free filtration of polymer melts for many years. An uninterrupted melt stream and an efficient degassing of the screen cavities allow continuous operation without any production interruptions. This screen changer is characterized by highest filtration quality with maximum system availability.

PDF 下载

CSC-DV

The Maag double-piston screen changer of the CSC-DV series is based on the proven piston design which requires no additional seals. This start-up screen changer combines all functions of a diverter valve and a continuous double-piston screen changers in a single compact unit. This results in a smaller installation dimensions and corresponding shorter residence time of the melt and lower heating requirements making this series to one of the most efficient machines in terms of capacity, spatial requirement, and heating.

PDF 下载

CSC-P

The large area screen changers from Maag are based on a proven dual piston design that does not require additional seals, and is equipped with application-specific filter elements. This design is ideal for applications requiring large area fine filtration. The seal cavities are tailor-made for the use of basket filters, Omega screens, disc and candle filters. Used are multi-layer filter media made of screen mesh and/or metal fiber fleece up to an active filter area of 15 m².

PDF 下载

BAOMO

BAOMO 拉条造粒机特别推荐用于实验室和小 批量生产。其典型特征切粒室中的所有元件均由悬臂承载。它们非常易于维护、调节和清洁。

PDF 下载

P-USG

The P-USG underwater strand pelletizing systems made by Maag Automatik have been particularly designed for both the production of virgin polymers with lower throughput rates and for recycling applications. The simple design of the machine stands for engineering reduced to the essentials while heading for high process stability and pellet quality.

PDF 下载

M-USG

数十年来,遍布世界各地的 M-USG 水下拉条造粒系统一直用于聚合物生产。这套灵活性极高的系统最大程度的保证了系统的实用性(尤其是在连续操作方面),并能够满足圆柱状粒子极高的质量要求。

PDF 下载

AERO

The AERO impact dryer provides for gentle, low-impact separation of cooling water in connection with M-USG underwater strand pelletizing systems. As the pellets are conveyed and dried without moving mechanical parts, high pellet quality is guaranteed. Over several decades, many customers have valued the unique benefi ts of the AERO dryer, in particular for virgin polymer production – consistently high pellet quality, easy handling, and maximum operating availability.

PDF 下载

PRIMOplus

包括 PRIMOPlus 造粒机的 WSG 干式拉条造粒系统经验证有效,它可生产出非常适合进一步加工的优质圆柱状粒料。 系统配置可变,以便与特定的生产要求达到最佳匹配,还可提供产品转换方面的最大灵活性。

PDF 下载

CENTRO

The CENTRO series of dryers is suitable for use with both SPHERO® underwater pelletizing and M-USG and P-USG underwater strand pelletizing systems. Well thought-out and highly accessible components, such as the core rotor device, serve to provide excellent operating characteristics and efficient servicing.

PDF 下载

DROPPO®

The DROPPO® drop pelletizing system made by Maag Automatik has been particularly designed for the production of perfectly uniform, dust-free pellets. The cooling and solidification process may use air, nitrogen, water or reaction liquid - thus offering utmost flexibility to the customer.

SPHERO®

SPHERO® 水下造粒系统专门设计用于加工热塑性塑料及生产球形粒料。这套灵活性极高的系统可用于生产原料、混料、母料、工程塑料、木塑复合材料、热塑性弹性体和热熔胶,也适用于回收物料造粒。

PDF 下载

M-ASG

The proven WSG dry-cut strand pelletizing systems with M-ASG pelletizers produce the highest quality of cylindrical pellets particularly suitable for further processing.

PDF 下载

PRIMO E

Successfully applied by hundreds of customers, the proven WSG dry-cut strand pelletizing systems with PRIMO E pelletizers produce the highest quality of cylindrical pellets or microgranular compounds particularly suitable for further processing. Variable system configurations allow for optimal matching with your specific production requirements and also provide utmost flexibility in terms of product changeover.

PDF 下载

PRIMO S

Successfully applied by hundreds of customers, the proven WSG dry-cut strand pelletizing systems with PRIMO S pelletizers produce the highest quality of cylindrical pellets or microgranular compounds particularly suitable for further processing.

PDF 下载

HAK Hot Air Knife

The hot air knife (HAK) is an optional or retrofitting device mounted to the die head of dry cut strand pelletizing systems which efficiently removes melt residues, outgassing remains, and die drools (such as build up of glass fibers) from both the die holes in the die plate as well as from the extruded strands themselves. With the hot air knife, product contamination can be reliably prevented and disruptions to production minimized.

The process water system BF fulfils the following functions:

- Collecting of the process water and feeding it at the required pressure to the individual locations of consumption

- Cooling of the process water

- Separating dust and contaminations from the process water

 Process water systems BF can be retrofitted into existing pelletizing systems.

PDF 下载

BAOLI S

BAOLI 干式拉条切粒机适用于进一步加工,可以生产高品质的圆柱粒或微粒产品。拥有为国内外超过上百家客户提供切粒设备的成功经验,BAOLI 的设计适用于混炼,色母粒的拉条切粒工艺。

PDF 下载

CYCLO® is energy-efficient pellet drying with minimal space required. The dryers are suitable for use with both PEARLO® underwater pelletizing and M-USG and P-USG underwater strand pelletizing systems. Well thought-out and highly accessible components, such as the core rotor device, serve to provide excellent operating characteristics and efficient servicing.

PDF 下载

PEARLO®

The PEARLO® underwater pelletizer shows the integration of the extraordinary features from Gala and Automatik. PEARLO® has been designed to process a wide range of polymers and thermoplastics and produces mostly spherical pellets. This efficient and flexible system is for example applied in the production of raw materials, compounds, masterbatches, Engineering plastics, wood and nature filler filled polymer composites, thermoplastics elastomers, hot-melt adhesives, gum base and in the field of recycling.

PEARLOFLEX SYSTEM®

PEARLOFLEX SYSTEM® 水下造粒机专门设计用于加工各种聚合物和热塑性塑料,且主要生产球形粒子。 这套灵活性极高的系统可用于生产混料、母料、工程塑料、木材和自然填充聚合物复合材料和热塑性弹性体,也适用于回收物料造粒。

PDF 下载

The extremely compact and robust lab pelletizer SGS 25-E4 is based on the proven technology of the SGS E-series. It features many of the functions and advantages of its popular „big brother“. On a laboratory scale, real full-scale trials can be carried out with the SGS 25-E4. Two independently- controllable drives permit infinitely adjustable length of the pellets.

PDF 下载

SGS 100 / 200 / 300-E6

More than thousand machines in operation: The cantilvered pelletizers of the SGS-E series demonstrate their quality under roughest production conditions - and that since beginning of the ninteen-eighties. A sturdy and sophisticated design as well as many technical details for improved accessibility when cleaning and/or changing products reduce unproductive downtime and make the SGS-E the preferred pelletizer for production of Masterbatches and small lots. The improved cutting geometry extends the production range especially when processing soft, elastic and very brittle materials.

PDF 下载

SGS 200-L / SGS 300-L / SGS 400-L

The SCHEER Series Pelletizer was developed and engineered for the production of thermoplastic pellets. Its compact design, anti-flyback cutting chamber and precision machine components are just a few of the reasons that make the SCHEER Pelletizer a unique combination of economical operation, long service life, at the highest quality and throughput.

PDF 下载

SGS 600-L / SGS 800-L / SGS 1000-L

The SGS series pelletizers are a development of the SCHEER company. The robust design, in conjunction with outstanding workmanship, makes the SGS series a top quality product in pelletizing technology. Some of the practical features which characterize these machines are dual-shell design, forced cutting of all strands, bearings outside the cutting area, variable speed drive. Series production of the individual elements facilitates a wide variety of combinations such that the SGS can be assembled to suit any individual application.

PDF 下载

CYCLO® is energy-efficient pellet drying with minimal space required. The dryers are suitable for use with both PEARLO® underwater pelletizing and M-USG and P-USG underwater strand pelletizing systems. Well thought-out and highly accessible components, such as the core rotor device, serve to provide excellent operating characteristics and efficient servicing.

PDF 下载

SLC

The Spring Loaded Cutter (SLC) is a cost efficient solution for pelletizing basic polymers at lower rates. The SLC pelletizer uses constant spring pressure to adjust the cutter blades to the die plate, reducing the need for operator attention. The cutter hub is connected to the motor shaft through a telescoping spring sleeve, and the blades are automatically positioned against the die plate using spring force. The blade force can be adjusted per application or product by simply changing springs.

PDF 下载

The Manually Adjustable Pelletizer (MAP) features a manual adjusting wheel to position the blades against the die plate. This simple blade adjustment design provides visual blade wear indication and maximum control of blade position. The unique design of the axial advance system replaces the need for a bearing housing assembly. The MAP design requires only one long life thrust bearing for accurate adjustments.

PDF 下载

The EAC pelletizer offers fully automated control of blade adjustment, positioning and monitoring, resulting in maximum blade and die face life. Monitoring and adjustment processes are programmed in the Gala PLC controlled system. An optional integrated blade position measuring system is available, providing indication of blade position and alerting the need for a blade change.

PDF 下载

EA

With the EASY ACCESS series, Gala offers wide doors which permit easy, convenient and safe access for internal cleaning and maintenance. All Gala dryers are supplied with door timed interlocks and local power disconnect for operator safety.

PDF 下载

ECLN Model

Easy-Clean Low-Noise (ECLN) dryers are particularly easy to service and meet high demands on noise reduction < 80 dB(A). Features:
•Double walls filled with insulating material. Sound pressure level of < 80 dB(A) is possible.
•Large, wide doors and larger distances between rotor screens and dryer walls provide easy access to the interior.
•Integration of the intake and air filter into the resin outlet optimizes countercurrent air flow so less air volume is needed for the drying process.
All Gala dryers are supplied with door timed interlocks and local power disconnect for operator safety.

PDF 下载

Gala has engineered a high capacity centrifugal dryer for continuous processes. Large resin producers are creating the need for higher capacity, continuous operation centrifugal dryers. By utilizing patented processes and innovative equipment designs, Gala has been able to manufacture a single centrifugal dryer (patent pending) with an output of 100 metric tons per hour, confirmed by full scale, customer witnessed testing, along with improved reliability for continuous long term use. All Gala dryers are supplied with door timed interlocks and local power disconnect for operator safety.

PDF 下载

The Gala Self-Cleaning Dryer is designed to achieve a high degree of self-cleaning which will reduce the otherwise common downtimes to a minimum. In most cases, this dryer need not be cleaned and opened to prepare the system for a color change. The entire compounding line can continue production and the “cleaning material” generated in pellet form can be readily reused. Once the purging of the extrusion system has been completed, the downstream equipment will be clean, and in most cases without requiring the operator to open and clean the dryer manually. This development was helped by the fact that easy cleaning is a built-in design feature of all Gala equipment, which has proved an essential asset in every day operation, especially in view of the increasingly complex nature of the jobs to be fulfilled by the users. This model dryer can be constructed with double insulated walls for the low noise version. The gap is filled with insulating material so that a sound pressure level of <80 dBA is guaranteed. Thorough cleaning is achieved through a combination of spray nozzles with a powerful water jet, air injection and controlled draining elements. A PLC controlled module can be used to achieve the highest degree of automation possible and to adapt the cleaning process to the product-specific requirements. All Gala dryers are supplied with door timed interlocks and local power disconnect for operator safety. Features: •Double walls filled with insulating material. Sound pressure level of < 80 dBA is possible.
•Large, wide opening doors and larger distances between rotor screens and dryer walls provide easy and convenient access to the interior.

PDF 下载

LPU®

Gala’s LPU® Laboratory Pelletizing System is specifically designed for laboratory developmental work, market sampling and light pellet production on materials such as PE, PP, ABS, PA 6, PA 6.6, PET, PBT, PPO and more. The system is designed for pelletizing rates up to 100 kg/h (20 – 220 lbs/hr), depending on the material.

PDF 下载

CLS

Gala's COMPACT LAB SYSTEM, is used downstream of an extruder or gear pump. Used in laboratory settings and by compounders when pelletizing and drying samples of polyethylene, polypropylene, polystyrene, ABS, flexible PVC and other polymers.

PDF 下载

A value engineered pelletizing system designed to economically pelletize and dry thermoplastics—polyethylene, polypropylene, polystyrene, flexible PVC, and more.

PDF 下载

The objective of the Flexline System: It was logical for Gala to invent and develop the Flexline, a machine concept that permits complex product changes within a matter of minutes. The fundamental engineering objective is to minimize unproductive time.

PDF 下载

Glass fiber compounds have traditionally been produced by strand pelletizing; however, recent trend shows movement toward underwater pelletizing.

The LWCP System concept was designed to allow the user to operate the production machine on a continuous basis and to increase output without interruptions from a defined minimum throughput up to the maximum line throughput. Start-up waste is reduced to a minimum.The multidirectional polymer diverter valve has been integrated in the pelletizing process. This polymer diverter valve includes at least one further diverting option in addition to the already-known two diverting possibilities. It permits either a very fast changeover between two product flow directions or the sequential operation of several pelletizers connected to one and the same polymer diverter valve. Because of the “online” switch over of the running system, interruptions can be largely avoided, and with the appropriate selection of the two pelletizing heads, a very wide throughput range of the production machine has become possible.

By preserving the cutting geometry of the Conair style Model 304 pelletizer and merging the innovative features found in the Scheer “E-Series” pelletizer the Bullet Series has emerged. Using these two proven market leaders in the base design we have a pelletizer that is easier and faster to clean and service. Designed for 24/7 operation this unit is ideally suited for both laboratory and production users. The tool-less removable In-feed & Discharge Chutes makes this pelletizer desirable for compounders that have multiple material change overs several times a shift.

 A single large pneumatic cylinder with an upper feedroll that remains parallel with the bottom roll produces a greater uniform pulling force with varying diameter strands for less waste. Higher rates, less waste, high product quality and ease of operation was the target for the design of this pelletizer.

PDF 下载

Strand Pelletizer T200 Series

The T200 Series Strand Pelletizer has been designed to substantially reduce maintenance and cleaning time. What would typically take 30 minutes to disassemble now takes only 2 minutes. Hand knobs and the pivoting feedroll assembly “Tips” forward for access to the lower feedroll and bed knife for easy cleaning and adjustment. The T200 Series can produce up to 6000 lbs/hr while running 85 strands at 700 RPM. The specific gravity for the materials being pelletized may increase or decrease the capacity. A Stellite tipped rotor, on a 3˚ helix provides a scissor-like cutting action for clean quality pellets. Rotor to bed knife adjustment is easily accomplished with the use of eccentrics. The eccentrics allow the rotor to be dialed into the bed knife to provide precise adjustments for even cuts. The lower feedroll also operates with eccentrics minimizing the gap between the doctor blade and the lower feedroll. The solid carbide bed knife is very economical with four usable edges. A Hypalon upper feedroll and diamond-knurled lower feedroll is belt driven for uniform pulling force on the incoming strands. The upper feedroll is offset directing strands directly into the bed knife producing quality pellets. Safety features include safety interlocks and a Dynamic braking system. The rotor automatically stops before the cover can be opened to avoid injury. The T200 Series Strand Pelletizer offers a variety of options. Quick-ship machines, sparepart deliveries, and rotor sharpening service are all part of Reduction Engineering Scheers guarantee of  ervice and manufacturing excellence.

PDF 下载

Gala tempered water systems are an integral part of a pelletizing system. The TWS conveys and cools pellets from the pelletizer cutting chamber to the resin outlet of the centrifugal dryer. The TWS is a closed loop system.
The individual components relevant for the process are selected according to the specific application requirements. Gala’s tempered water systems are typically used in pelletizing process at rates up to 15.000 kg/h.

PDF 下载

Gala’s IS (Integrated Sieve) Tempered Water System features a V-wire screen mounted directly under the dryer water outlet to filter solids from the process water prior to recirculation to the pelletizer. The screen is easy to remove for cleaning, reducing downtime between product changes. TWS 20 – 80 systems are skid mounted.

PDF 下载

The MB500® Tempered Water System is a result of a cooperative effort between Gala and its Customers to develop a machine which directly addresses the need for the Custom Compounder to thoroughly clean the system between products. Small color masterbatch runs require frequent changeover. The MB500 targets this specific Customer need.

PDF 下载

With the bidirectional polymer diverter valve ( Model BiPoDV), the melt is diverted sequentially into different directions. This means that, depending on the requirements of the job, the machine operator can work with two pelletizing heads that can be individually configured. The operator can prepare the machine for the next task and assemble, heat and tighten the ideal pelletizing tools under full production conditions. All connecting channels are freely accessible so the most recently used channels can be thoroughly cleaned. For product change, the polymer diverter valve housing is rotated and lifted into the new production position so melt flow is directed to the new fully prepared tool. The change of melt direction for the next production job can be readied in very little time and without tools. A lift-and-rotate mechanism makes it possible to change to a fully prepared and heated die plate at the operative machine within minutes.

PDF 下载

Fitted with a screen pack, the quick opening clamp is situated between an extruder or melt pump and the pelletizer die plate. The QOC is used to filter particles from the melt before entering the die. In applications where screen changers would not be fully utilized to their potential, the QOC offers an economical solution.

The dual canister filter provides extra process water filtration in high production situations where shutdowns are kept to a minimum or when processing highly filled products that create fine particulates not caught by a standard fines removal screen. The dual canister filter assembly is located after the process water pump in the tempered water system. Its purpose is to filter any fine particulates that may not have been caught in the standard water system filtration screen. Most customers requesting this feature wish to eliminate unnecessary downtime for cleaning or for extra protection when pelletizing heavily filled products that cause fine dust. This system is typically used on pellet production lines running 250 gpm (60 m³/h) or greater. The system consists of two stainless steel cylindrical housings, each containing a screen basket with 100 – 200 micron mesh bag. Valves and piping complete the system, as well as appropriate electrical controls. This filtration system can be programmed for an alarm to sound for manual filter changing or, in most cases, fully automated changing from one filter to another. One canister is in operation while the second is being prepared or ready for use.

The Gala FRS removes fine particles >0.15 mm from the process water. Clean process water prevents product contamination and the settling of fines in key system components. The curved screen and collection basin are made of stainless steel. A self-priming pump and internal piping may be used to convey process water from the dryer and over the curved screen. If the gradient is appropriate, gravity feeding will be sufficient. The process water contaminated with particles is first conducted into a holding chamber and then flows evenly over the curved screen. The fines >0.15 mm are separated and collected in a collection basin. The filtered water is recirculated.

The Gala Band Filtration System (BF) is designed for the pellet production line where there are several color changes throughout the day, and for the system used for cutting a product that creates fines resulting in contamination in the process water system. The operator do not have to monitor the system, the advance of the filter media is automatically activated in order to catch all fines down to 20 µm created before the process water becomes contaminated. In most of the cases, the water does not need to be replaced as it stays perfectly clean. The fines are continuously separated from the process water and collected in a mud cart.

The Gala Continuous Band Filtration (CBF) is also designed as a retrofit for the pellet production line where there are fines created regularly on some products and operator attendance would normally be required to clean the IS drawer in the production frequently. After installation of the CBF, the operator does not have to monitor the system anymore. The advance of the filter media is continuous and does not need any activation in order to catch fines larger than 150 µm. The process water contamination is in most cases eliminated. The fines are continuously separated from the process water and collected in a mud cart.

The Gala DFRS removes particles down to 0.14 mm from the process water. Clean process water avoids the contamination of the product and the settling of fines in key system components.The entire volume of process water separated from the pellets in the centrifugal dryer is conveyed by a self-priming waste water pump to a vibrating screen where it is continuously filtered. The fines are automatically separated from the circulating water and collected in a container outside the water tank. The water dripping from the container is recycled into the process. By actuating a valve, the vibrating screen can be by-passed so the process water is conveyed directly into the tank.

Developed by Gala to simplify the start-up phase of the underwater pelletizing process.

CENTRO

The CENTRO series of dryers is suitable for use with both SPHERO® underwater pelletizing and M-USG and P-USG underwater strand pelletizing systems. Well thought-out and highly accessible components, such as the core rotor device, serve to provide excellent operating characteristics and efficient servicing.

PDF 下载

With the multidirectional polymer diverter valve (Gala Model MdPoDV), the melt is diverted sequentially into different directions during production. The MdPoDV is designed to allow a continuous operation of the production machine and to increase output without interruptions from a defined minimum throughput up to the maximum line throughput. The machine does not have to be stopped and no throughput related modifications are required, so only minimum start-up waste is generated. At least one additional diverting operation is integrated, in addition to diverting to the floor or production position, allowing faster changeover between two product flow directions or the sequential operation of multiple pelletizers connected to the same diverter valve.

PDF 下载

ZHULI®

ZHULI ® 水下造粒系统包含切粒机、粒子干燥机和水处理系统,广泛适用于各种聚合物和热塑性塑料。该系统高效稳定,结构灵活且占地面积小。采用德国原装进口核心部件,在中国本地总装。 得益于全球多达9000台的实际水下切粒机的装机经验积累,我们有能力确保用户实现最高的投资收益。

PDF 下载

PURO® 是一种适用任何应用的高效水系统技术。该节能紧凑型系统占用空间最小,适合与 PEARLO® 水下造粒系统、M-USG 和P-USG 水下拉条造粒系统搭配使用。设计周密且非常容易触及的组件可提供极佳的工作特性,且便于高效检修

PDF 下载

The proven WSG dry-cut strand pelletizing systems with M-ASG pelletizers produce the highest quality of cylindrical pellets particularly suitable for further processing.

PDF 下载

PRIMOplus

The proven WSG dry-cut strand pelletizing systems with PRIMOplus pelletizers produce the highest quality of cylindrical pellets particularly suitable for further processing. Variable system configurations allow for optimal matching with your specific production requirements and also provide utmost flexibility in terms of product changeover.

PDF 下载

Baoli 干式拉条造粒机由两端轴承支撑,可生产出非常适合进一步加工的优质圆柱状粒料。BAOLI 提供三种尺寸的机器,工作宽度为 100 mm、200 mm 和 300 mm,可挤出最多 75 根聚合物料条。BAOLI 的先进切粒工具可保证很高的生产率,并确保拉条造粒机的长期可用性。

PDF 下载

The “WS” Series Wet Cut Waterslide pelletizing system enables you to run a wide variety of materials with little or no operator assistance. Strand conditioning water is used to improve pellet quality by reducing fines.

The several hundred SGS-E plastic pelletizers already in continuous use are proof of the quality and cost effectiveness of these machines. The entire range of thermoplastics is pelletized, from soft rubber-like to brittle, fragile, high-density and glassfiber reinforced thermoplastics. The machines are designed for extreme working conditions in 3-shift operations and have an appropriately robust construction. The ideal balance between price and performance has always been our prime objective.

The REX basic Pulverizer was designed for users that do not require tight particle distribution specification and can be used to pulverize a wide variety of materials. This includes compounding, extrusion, molding and recycling markets. To further enhance the process capabilities, several different process cooling innovations can be added to the machine. Some engineered Polymers require extremely low temperatures to enable processing. These cooling options make this unit a viable alternative to a full cryogenic pulverizer.

PDF 下载

Our systems use liquid nitrogen to cool down a feed material prior to and/or during milling to either help prevent its melting or decomposition, or achieve embrittlement. Because each product is unique, rates will vary.

BAOLI-3

BAOLI-3干式拉条切粒机采用两端轴承支撑的龙门式结构,能够充分满足生产各种高标准圆柱状塑料粒子的需求。BAOLI-3采用专利的台面升降技术,开放式结构设计更加优化,易于操作和维护,同时也能更好的兼容上下游设备。BAOLI-3采用德国澳迈原装进口的高性能切粒核心组件,确保长期稳定的生产出高品质的塑料粒子。

PDF 下载