We would like to offer you more on our website and optimize it accordingly. Therefore we would like to track visitor behaviour. If you agree, please click OK.
All results ...
No results
loading ...

The polymer diverter valve is used to direct the polymer melt from the pump or extruder to the floor, to the side, or directly into the die plate.

PDF 下载
Application: Polymer manufacturer Masterbatch compounding Recycler

DV

Maag diverter valves (DV) are based on the proven single-piston design that operates without any additional seals. The diverter valves type DV are used in Plastics manufacture, pelletizing, and compounding applications where they function as deflection, safety, and start-up valves. Their sturdy construction guarantees reliable and leak-free operation for many years, e.g. as start-up support for underwater pelletizing or for discharging start-up material in pelletizing applications.

Application: Polymer manufacturer Masterbatch compounding Recycler

With the multidirectional polymer diverter valve (Gala Model MdPoDV), the melt is diverted sequentially into different directions during production. The MdPoDV is designed to allow a continuous operation of the production machine and to increase output without interruptions from a defined minimum throughput up to the maximum line throughput. The machine does not have to be stopped and no throughput related modifications are required, so only minimum start-up waste is generated. At least one additional diverting operation is integrated, in addition to diverting to the floor or production position, allowing faster changeover between two product flow directions or the sequential operation of multiple pelletizers connected to the same diverter valve.

PDF 下载
Application: Polymer manufacturer Masterbatch compounding Recycler

With the bidirectional polymer diverter valve ( Model BiPoDV), the melt is diverted sequentially into different directions. This means that, depending on the requirements of the job, the machine operator can work with two pelletizing heads that can be individually configured. The operator can prepare the machine for the next task and assemble, heat and tighten the ideal pelletizing tools under full production conditions. All connecting channels are freely accessible so the most recently used channels can be thoroughly cleaned. For product change, the polymer diverter valve housing is rotated and lifted into the new production position so melt flow is directed to the new fully prepared tool. The change of melt direction for the next production job can be readied in very little time and without tools. A lift-and-rotate mechanism makes it possible to change to a fully prepared and heated die plate at the operative machine within minutes.

PDF 下载
Application: Polymer manufacturer Recycler

Fitted with a screen pack, the quick opening clamp is situated between an extruder or melt pump and the pelletizer die plate. The QOC is used to filter particles from the melt before entering the die. In applications where screen changers would not be fully utilized to their potential, the QOC offers an economical solution.

Gala has been manufacturing precision die plates for its underwater pelletizers since the late 1970s. The die plate is the heart of the Gala underwater pelletizing system. All Gala dies are custom designed to fit each customer’s specific polymer requirements. The material of construction and wear face material are determined by the specifications of the Customer’s application. All die face surface materials provide maximum life before resurfacing is required. Gala’s standard electrically heated die is suitable for most applications; however, oil or steam heating can be utilized. The dies are available in one-piece design or in our patented two-piece design. The advantage of the two-piece design is the center (Insert) of the die can be quickly removed from the main body for routine maintenance or simply a need to change to a different die configuration. This is especially beneficial with frequent product changes in that you do not have to remove your heaters in order to make the die plate insert change. Continuous research and development is being invested in our dies to ensure our customers have the most energy efficient, operator friendly pellet production system available.

Gala’s die grinding tool gives you the option of grinding the die plate without removing it by simply threading the tool onto the cutter hub holder in place of the cutter hub. This unique tool is an effective method of removing small irregularities and grooves that can adversely affect pellet quality. High quality design and diamond material of construction provide the user with a superior and affordable die grinding tool.

Gala’s patented self-aligning cutter hub provides precise positioning between die plate and pelletizer shaft, ensuring alignment of all cutter blades against the die face. This results in uniform pellet quality and reduced blade and die face wear.

D2 is the material of construction known as the benchmark of the industry. Much like steel belted radial tires you get on a new car, this material will usually get the job done at a low price. The primary element is 12% Chrome which gives the blade good toughness and rust resistance. M-2 material is a member of the high speed family of tool steels. M-2 is primarily used to produce metal cutting high speed drill bits. Due to a high amount of “Moly” (Molybdenum) in its composition, this material resists break down under high heat. Under most circumstances, M-2 should last 1.5 times longer than D-2. PM(Powdered Metal) is the racing tire for a producer who wants output and is willing to pay the price. This material has a 9% Vanadium content which gives it a huge advantages in both wear and toughness. Depending on conditions, this material should last 3x to 5x longer over D-2. Note: In addition to the Vanadium content, PM material is made in a different fashion than other tool steels. In the powdered metal method the elements are all introduced in powdered form into a big furnace. The elements are then detonated so they are very evenly dispersed. Under these conditions the final product has a very uniform grain structure with little or no clumps of carbides that can chip away. 440A Stainless Steel (available on special request only) has an 18% Chrome content and is part of the stainless steel family of tool steels. This is the best tool steel offering for knives that are used in very corrosive conditions. This very special grade of stainless is able to be hardened to 54 / 56 Hrc. Specialty blades, such as half thick or half length, or various materials of construction, are available for specially pelletizing applications. Please ask our spare parts sales staff for more information.

Application: Polymer manufacturer Masterbatch compounding Recycler

Developed by Gala to simplify the start-up phase of the underwater pelletizing process.

The cutting chamber is the housing in which the pellets are actually cut. The pelletizer is coupled to the cutting chamber, which places the cutter blades inside the cutting chamber (often referred to as the water box), where the blades will contact the die face. As the process water enters the inlet of the cutting chamber, molten polymer is simultaneously cut into pellets by the rotating cutter blades. At this point the pellets begin to solidify and are carried by the process water from the cutting chamber to the dewatering system. From the dewatering system or centrifugal dryer, the pellets are ready for downstream processing or packaging. The Gala cutting chamber is designed to provide maximum service life. The Gala design can be rotated 180˚ so that once pellet abrasion has occurred at the exiting side of the cutting chamber, it can be rotated 180˚ to the less worn pellet entrance. Resistance wear coatings are also for abrasive applications. For extremely sticky materials, special design features for the cutting chamber are also available.

Gala provides a number of special tools for the operator of a Gala Underwater Pelletizer. These tools are designed to allow the successful performance of specific tasks.
  The flow guide provides optimization of the process water flow:
•Patented adjustable flow guide
•Water flow direct to the die plate
•Avoidance of agglomerates
•Reduction of the water flow rate
•Reduction of the pellet moisture
•Smaller dryer possible (less dewatering required)

• Designed to catch and discard oversized pellet clusters (agglomerates) before they enter the rotor area of the dryer.
• Constructed of 304 S/S and is bolted to the dryer inlet, with inclined grate and gasketed door.
• Manually operated or pneumatically actuated, depending on the size of the dryer and the requirements of the system.

Wedgewire
• have up to 25% more utilized screen area
• have very precise openings
• are stronger and more durable

 Expando
• primarily used for micropellets
• available in either slotted or punched styles
• various fastening mechanisms

 ML
• multi-layer screen (patent pending)
• greater open area for small particle drying applications

Perforated
• available in 16 - 22 gauge S/S
• up to 51% open area
• perforated openings from 1 mm to 4 mm

Sectional Rotor
• Modular design
• Ease of replacing individual rotor components
• Upgradeable


 One-Piece Rotor
• One-piece solid shaft
• Easier shaft replacement without alignment problems
• Ability to improve throughput and moisture levels


 HMA Rotor
• Designed specifically for hot melt adhesive (HMA) or tacky product applications
• Designed to ensure proper conveying and discharge of tacky products

• Heavy gauge materials of construction
• Abrasive resistant coatings in high wear areas
• Modular components in high wear areas for easy replacement

Most all metal components within the dryer can be coated with a durable non-stick coating. This is normally confined to product contacting areas to reduce costs but can be expanded to non-product contacting areas as needed. This is a process where a release polymer is impregnated into a coating that is essentially welded to the base metal of the part that is to be coated.

• Bolts to dryer resin outlet
• Constructed of 304 S/S
• Designed to divert product during start-up, for sampling or filling containers
• Manually or pneumatically operated